<strike id="2obnd"><bdo id="2obnd"><rp id="2obnd"></rp></bdo></strike>

     

    E-mail page
    Print

    ATA Home | 中文版 
    Last updated March 10, 2006

    Quality Control
    Quality control is the most important part in the production. There are two QC at that end of every soldering line and component insert line respectively to make sure the right location of component, to check the welding point, to clip the extra pin for better outlook; and every PCB will be inspected in this way.
    There is are two QC at the middle and end of every packing line responsible for input voltage, AVR range, charging voltage, inverter voltage, shutdown voltage and etc in compliance with the standard specified.
    The Sinewave waveform checking is done on high frequency series UPS as all high frequency series UPS have pure Sinewave output
    Before packing, all UPS will undergo the discharging testing, charging testing (testing for 8 hours), dynamic testing ( All UPS will be switched on and off for five times in every minute, controlled by software, lasting for one hour).
    ? QC/Technical Support
    We have obtained the ISO 9001 approval and CE certificate. Every procedure from raw materials warehousing, component inserting, performance testing of PCB, finished UPS performance testing to UPS ageing testing is under strict quality control. We always guarantee the best quality and service to our clients.
     
    ? QC Staff
    10 to 19
     
    ? Standards & Approvals

    ISO 9001, CE
     
    ? Materials/Components
    We mainly import electronic component from Japan and U.S.A, such as HITACHI capacitor and NICHICON capacitor to make sure the stability of our UPS.
     
    ? Procedures/testing Details
    Our QC department carries out quality control according to stringent standard. It consists of different posts inclusive of IQC, QC, IPQC, QA and QE, each of which is in charge of related procedure to examine all materials, semi-finished products and finished products.
     
    ? Other Information
    As a holder of ISO 9001 approval and CE certificate, we guarantee to produce high-quality products under advanced standards for our clients.

     

    Shante Zhuhai Electronics Co., Ltd.
    Tel: +86-757-86369105
    Add: 2nd Floor, H Building, Beiyue Industrial Zone, Guicheng Nanhai, Foshan City, GD China
    Postal code: 528000
     
    Key Contact:
     
    James
    General Manager
    E-mail:james@maxiups.com
    Mobile:+8613923273922
     
    Website
    http://www.schlife360.com 

    Copyright ? 2006 ATAUPS.COM Copyright ? 2006 ATAUPS.COM All rights reserved. Reproduction in whole or in part in any form or medium without the express written permission of ATAUPS.COM and ATAUPS.COM is prohibited.
    乱中年女人伦视频,免费人成在线观看网站,欧美xxxx做受欧美88,琪琪电影网午夜理论片